Limited Time Offer - Save 10% On Orders Over $500* | Use Code 4WP500 At Checkout - Ends Soon!
Limited Time Offer - Save 10% On Orders Over $500* | Use Code 4WP500 At Checkout - Ends Soon!
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16 inch plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design.
All BFH™ Bumpers are fabricated from 100% cold, hard steel. Some manufacturers have begun producing aluminum bumpers in order to "save weight", but at a mere 35 pounds, the BFH™ is among the lightest bumpers on the market, and you sacrifice none of the strength or durability you would with an aluminum bumper. Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH™ weighs only 43 pounds!
The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4 inch forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.
The Trail Stinger is similar in proportion to the famous Poison Spyder Trail Stinger. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger extends 13.4 inch forward from the front edge of the bumper, and 17 inch high from the top surface of the bumper.
The Comp Stinger for the BFH™ front bumper matches the lines of our stand-alone Comp Stingers. For those getting into the more hard-core aspects of the sport, the Comp Stinger provides even better forward-roll prevention, as well as increased protection of the radiator area and engine compartment in the event of a rollover. The Comp Stinger extends 17.6 inch forward from the front edge of the bumper, and 21.9 inch high from the top surface of the bumper.
The optional Heavy Duty Recovery Shackle Tabs are machined from 1 inch thick plate steel to provide a secure attachment point for 3/4 inch recovery shackles. These tabs are specifically engineered to match the angles of the BFH™ bumper to result in zero loss in approach angle.
The JK BFH Disco Skid is a bolt-on skid plate to protect the factory electric swaybar disconnect motor on JK's. In stock form this motor hangs low, making it vulnerable to rocks and trail hazards. The BFH Disco Skid protects it, but also comes with hardware and instructions to rotate the motor upward, further out of harm's way. Like the BFH bumper, the Disco Skid is made of CNC laser-cut 3/16 inch plate steel and is designed to be a great looking, functional addition to the JK BFH bumper.
The Winch Fairlead Mount is a separate piece (bolt-on, not weld-on) that mounts between your winch and the BFH™ bumper to provide a secure mounting surface for the winch fairlead. Note that the BFH™ bumper already has an integrated winch mount, but this piece is needed in order to mount a Hawse or roller fairlead. Poison Spyder billet aluminum hawse fairleads and fairlead light mounts are also available.
Whether you keep it simple or customize it with all the options, the BFH™ front bumper is a serious bumper for hardcore wheeling!
Fits on a 1994 jeep yj love it thick metal nice welds
Poison Spyder is the best you can get. This front bumper and stinger comes welded together and the install is super easy. We initially had issues because of the inconsistency with how the TJ's front stock bumpers were produced so we called poison spyder directly to find out what the issue was. We were sent directly to their tech guy who walked us through how to fix it. Amazing customer service.
This bumper is great. Well built. Fits great.
Love the bumper fit really well but there's one thing they should think about I have 1997 tj with tube fenders and with this bumper i cut two 4 1/4 holes in it to fit blinker/ parking lights in it and we'll looks good plus it gives you two holes to put bolts on the winch so don't have to mount it first but anyway really good quality for the money
Love this bumper, everything you need and nothing you don’t. Fit was good, bolt holes were a little snug probably due to welds, but it fit fine and is very well made. Welds are beautiful. Stinger is nice and big, and not even very heavy.
Buy the fair lead mount at the same time. Install was relatively easy. A second set of hands definitely helps.
I replaced my ARB Bull bar with this bumper. With the bull bar I was always tagging trees coming thru tight trails with 3 point turns. This bumper clears obstacles much better while still protecting the grill and winch. Just wish it had a powdercoating option form the mfr. would also make a lot more sense to have an integrated mount for the winch fairlead.
Excellent fit and finish. The bumper slid in place and the bolt holes aligned perfectly. Note it doesn't come with a fairlead mount and you'll need bolt your winch to the bumper before final install because you can't reach the front holes from under the TJ.
Q: Any modifications needed with a Warn VR EVO winch? I see some brands call for shaving the D-Ring mounts. Answer this question
A: My Warn Evo 8s bolted right up.
Answered by Colby from SF Bay Area on 11/14/2023
A: i dont have the Warn VR EVO but i will add i do have the badland 12000 apex and have no clearance issues on the D-ring mounts
Answered by matt from lake ariel pa on 11/08/2023
Q: Would this fit a yj since the one for the yj has been discontinued I know the frames are the same width Answer this question
A: No it will not fit.
Answered by Kelly from 4WP Corporate Headquarters on 06/02/2021
Q: What is the difference between this one and the trail? The specs show the same dimensions. It’s almost like they copied and pasted . Answer this question
A: Well they are different brands, they are made in different locations. This one has a Poison Spyder logo on it.
Answered by Kelly from 4WP Corporate Headquarters on 02/15/2021
Q: What components would I need to fit a winch to this bumper? or does it come with everything I need? Answer this question
A: Hi TJmadness, This Poison Spyder Customs BFH Front Bumper with Shackle Tabs and Trail Stinger in Bare Steel has a built in winch mount, you won't need anything separate to install a winch on this bumper. Great question, thanks for your inquiry.
Answered by Anonymous on 06/09/2016
Q: what does it weigh? Answer this question
A: K, the Poison Spyder Customs BFH Front Bumper with Brawler Bar and Shackle Tabs in Bare Steel weighs in at 40lbs. Hope this helps!
Answered by Anonymous on 01/28/2016
Poison Spyder Customs has a heritage in hardcore off-road accessories that started when founder Larry McRae was little. McrRae's daddy use to load him up in the Ford Bronco to explore the off-road trails of the southwest. McRae became a professional rock crawler who raced for Nelson & Nelson Racing in the early 2000s. McRae purchased PSC from the Slay family and kept the vision of developing and fabricating high end quality off-road accessories right in the Pomona, California headquarters . McCrae and his wife are members of the Inland Empire 4 Wheel Drive club. McCrae himself is a Past President and Mrs. McCrae is a past Treasurer. Every product produced by PSC starts as a prototype tested on real trails by members of the club. Shop Poison Spyder Customs Now
Join our mailing list to receive information on new products, special events, discounts and more!
Sign up to receive deals by email!
Sign up to receive text alerts about new product releases, exclusive access to sales, and much more!
Sign up to receive deals by text!
By submitting, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from 4 Wheel Parts (4WP) on 21208. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy